شناسایی غیرمخرب تغییرات ریزساختاری ناشی از سوختگی سنگ‌زنی با بهره‌گیری از کاوشگر‌های الکترومغناطیسی

نشریه: مهندسی ساخت و تولید 

تاریخ انتشار: ۴ اردیبهشت ۱۴۰۰

چکیده:

یکی از مهمترین مشکلات فرآیند سنگ‌زنی در شرایط عدم کنترل صحیح پارامترهای آن، وقوع سوختگی سنگ‌زنی می‌باشد که منجر به افت خواص مکانیکی و کارایی قطعه می‌شود. پژوهش حاضر با هدف شناسایی غیرمخرب پدیده سوختگی سنگ‌زنی در قطعات فولادی انجام شده است. برای این منظور، با تغییر پارامترهای سنگ‌زنی، میزان متفاوتی از سوختگی‌ در سطح قطعات فولاد ساده کربنی ایجاد شده است. نتایج حاصل از مشاهدات میکروسکوپی و آزمون ریزسختی‌سنجی، وقوع دو نوع سوختگی نرم‌شدگی حرارتی (بازپخت سطحی) و سخت‌شدگی مجدد (تشکیل لایه سفید سخت در سطح) را نشان می‌دهد. ادامه مطلب

/0 دیدگاه /توسط

Application of Artificial Neural Network and Multi-magnetic NDE Methods to Determine Mechanical Properties of Plain Carbon Steels Subjected to Tempering Treatment


Journal: International Journal of Engineering

Publication date: 1 April 2021

Abstract:

The present paper shows the results of applying an artificial neural network to three non-destructive magnetic methods including magnetic hysteresis loop (MHL), eddy current (EC), and magnetic flux leakage (MFL) techniques to determine mechanical features of plain carbon steels with unknown carbon contents subjected to tempering treatment. ادامه مطلب

/0 دیدگاه /توسط

Predicting hardness profile of steel specimens subjected to Jominy test using an artificial neural network and electromagnetic nondestructive techniques

Journal: Nondestructive Testing and Evaluation

Publication date: 04 Jun 2020

Abstract:

Based on relationships between electromagnetic properties and microstructural changes in steel, the current paper describes the development of an electromagnetic technique to determine steel hardenability, non-destructively. Performing Jominy end-quench test, magnetic hysteresis loop and eddy current methods have been applied to SAE 4140 standard steel samples to explore applicability of the non-destructive techniques for determining hardenability. ادامه مطلب

/0 دیدگاه /توسط

A Magnetic Nondestructive Evaluation Method to Simultaneously Determine Chemical Composition and Heat Treatment Characteristics of Plain Carbon Steels: A Statistical Modeling Approach

Journal: Materials Engineering and Performance

Publication date: 26 March 2020

Abstarct:

In this paper, combination of multiple regression method, logit model and discriminant analysis is proposed to extract underlying relationships among metallurgical characteristics of steel samples with different carbon contents subjected to various heat-treating cycles and magnetic properties. ادامه مطلب

/0 دیدگاه /توسط

An accurate non-destructive method for determining mechanical properties of plain carbon steel parts using MHL and GRNN

Journal: Nondestructive Testing and Evaluation

Publication date: 19 March 2020

Abstract:

The sensitivity of magnetic non-destructive methods to both chemical composition and microstructure has limited their potential application for determination of mechanical properties in plain carbon steels under conditions of varying carbon content and microstructure. ادامه مطلب

/0 دیدگاه /توسط

Quantitative Evaluation of Deformation Induced Martensite in Austenitic Stainless Steel Using Magnetic NDE Techniques

Journal: Nondestructive Evaluation 

Publication date: 5 March 2020

Abstract:

The goal of the present study is to examine the applicability of non-destructive magnetic hysteresis loop technique and Hall effect sensor to characterize the strain induced α′-martensite in an austenitic stainless steel. ادامه مطلب

/0 دیدگاه /توسط

Characterization of Hadfield Steels Subjected to Various Heat-Treating Processes by Nondestructive Eddy Current Method

Journal: Russian Journal of Nondestructive Testing

Publication date: 23 December 2019

Abstract:

A nondestructive eddy current method has been used to characterize microstructural features of Hadfield steels subjected to various conditions of heat treatment. The heat treatment parameters including quenching media (furnace, air, and water) and tempering temperatures (in the range of 200–600°C) were varied to obtain different microstructures. ادامه مطلب

/0 دیدگاه /توسط

Prediction of chemical composition and mechanical properties in powder metallurgical steels using multi-electromagnetic nondestructive methods and a data fusion system

Journal: Journal of Magnetism and Magnetic Materials

Publication date: 2 December 2019

Abstract:

Variation in chemical composition is one the most important parameters that affects the microstructure and mechanical properties of powder metallurgical (PM) steel parts. Therefore, utilization of nondestructive methods to determine the chemical composition and microstructural/mechanical properties of a given PM steel sample could be a subject of importance. ادامه مطلب

/0 دیدگاه /توسط

Electromagnetic methods to improve the nondestructive characterization of induction hardened steels: A statistical modeling approach

Journal: Surface & Coatings Technology

Publication date: 18 October 2019

Abstract:

The present paper aims to enhance the accuracy of surface hardness and case depth measurement of induction hardened steel parts using statistical modeling methods and electromagnetic nondestructive techniques. In this research, to create various hardened layers with different thicknesses, eight different conditions of induction hardening treatments have been performed on cylindrical AISI 1045 steel samples. ادامه مطلب

/0 دیدگاه /توسط

Non-destructive determination of microstructural/mechanical properties and thickness variations in API X65 steel using magnetic hysteresis loop and artificial neural networks

Journal: Nondestructive Testing and Evaluation

Publication date: 05 Sep 2019

Abstract:

in this paper, a combination of non-destructive magnetic technique and artificial neural networks is introduced, firstly, to ensure that the heat treatment process applied to a given API X65 steel sample results in desired microstructure and mechanical properties and secondly, to determine thickness variation which may occurs as a result of corrosion effect. To evaluate the effects of microstructure/mechanical properties and thickness variations on magnetic parameters, the magnetic hysteresis loop method has been applied on API X65 steel specimens with the thicknesses of 1–4 mm, each subjected to four different heat-treating cycles (austenitised samples were cooled in furnace, air, oil and water). ادامه مطلب

/0 دیدگاه /توسط